info@emaxmetal.com    +86-571-83737375
Cont

Have any Questions?

+86-571-83737375

Apr 22, 2024

What Is The Stamping Process in Automotive Manufacturing?

Cars have been called "the machine that changed the world." Because the automobile industry has strong industrial correlation, it is regarded as an important symbol of a country's economic development level. There are four major processes in automobiles. The stamping process is the top priority and the first of the four major processes.
Stamping is a forming processing method that relies on presses and molds to apply external force to plates, strips, pipes and profiles to cause plastic deformation or separation, thereby obtaining workpieces (stamping parts) of the required shape and size. Stamping and forging both belong to plastic processing (or pressure processing), and are collectively called forging. The blanks for stamping are mainly hot-rolled and cold-rolled steel plates and strips. 60 to 70% of the world's steel products are plates, most of which are stamped into finished products.
Car bodies, chassis, fuel tanks, radiator fins, boiler drums, container casings, and core silicon steel sheets of motors and electrical appliances are all stamped. There are also a large number of stamped parts in products such as instruments and meters, household appliances, bicycles, office machinery, and living utensils.

The mechanical steering system uses the driver's physical strength as the source of steering power, and all mechanical transmission structures are mechanical. The mechanical steering system consists of three major parts: steering control mechanism, steering gear and steering transmission mechanism.
A. Separation process:
The sheet metal is separated along a certain contour line under the action of external force to obtain finished products and semi-finished products with a certain shape, size and cut surface quality. Separation condition: The stress inside the deformed material exceeds the strength limit σb.
a.Blanking
Use a die to punch along a closed curve, and the punched part is the part. Used to manufacture flat parts of various shapes.
b.Punching
Use a die to punch along a closed curve, and the punched part is scrap. There are several forms such as front punching, side punching, and hanging punching.
c. Trimming
Trim the edges of formed parts neatly or cut them into a certain shape.
d.separation
Separation is produced by punching along an unclosed curve with a die.
When the left and right parts are formed together, the separation process is often used.
B. Forming process:
The blank undergoes plastic deformation without breaking to obtain finished products and semi-finished products of a certain shape and size.
Forming conditions: Yield strength σS < material internal stress < strength limit σb.
a. Drawing
Forming sheet blanks into various open hollow parts.
b.Flip
The edge of the sheet or semi-finished product is formed into an upright edge along a certain curvature.
c. Plastic surgery
A forming method used to improve the dimensional accuracy of formed parts or obtain a small corner radius.
d. Turn holes
Upright edges are produced on pre-punched sheets or semi-finished products or on unpunched sheets.
e.Bend
By bending sheet metal into various shapes along straight lines, parts with extremely complex shapes can be processed.

Send Inquiry