What accessories does a set of utility poles have?
Cement cable pier, galvanized steel strand, wedge-shaped wire clamp, cable-pulling ring, cable-pulling hoop, conductors under 95mm2, 1 extension ring and 1 pair of ferrules, wedge-shaped wire clamp.
Pull wires are:
Ordinary pull wires are used for terminal rods, corner rods and tension rods to balance the tension;
The two-side cable is installed on the two sides of the linear pole to enhance the wind resistance of the pole;
Square pull wire, pull wire around the pole to enhance the stability of the pole;
The aisle cable is to set up a cable rod on the side of the road, and make an aisle cable on this pole, which must be kept at a certain height and will not affect the traffic;
The V-shaped cable is a cable that is installed at the upper and lower parts of the resultant point of tension when the pole is high, there are many cross arms, and there are many erected wires, and the lower part is combined into one to form a "V" shape;
The common pulling wire is to fix the pulling wire on the adjacent poles to balance the pulling force;
The bow-shaped pull wire is a pull wire that is added to the middle of the pole to prevent the pole from bending.
