How to install wire clip resistors safely
The wire clip is used to fix the wire to withstand the pulling force of the wire, and to fix the wire on the metal fittings on the wire-resistant string group or the tower.
How to install wire clips better and more safely is a commonly overlooked problem.
1. When the bolt-type clamp is installed at a high position, the bolt must be tightened before returning to the tow rope.
2. When installing wires and lightning protection wires and lightning protection wires (optical cables), reliable measures must be taken to prevent wiring. 3. Loop the rope around the thread cut on the tower.
4. When installing the ground, the anchoring of electric wires and lightning conductors (optical cables) should be reliable, and the anchoring work should be carried out by technicians. 5. The safety relief valve of the hydraulic pump shall not be adjusted at will, and shall not be unloaded with the relief valve.
