How to avoid deformation of stamping parts during processing
During the processing of our stamping parts, the main reason for the deformation is the residual effect, because when we are stamping, with the existence of the gap, the stamping material on the side of the die will be stretched, while on the DCS side it will be Compression, so we use the Compaction material to prevent the deformation of heavy objects during the stamping process. In addition, professional Hebei stamping parts processing manufacturers will give you some other methods to prevent distortion.
The first point is that the molds we use for stamping must be reasonably designed. Generally speaking, the order of blanking may also affect the accuracy of stamping during the stamping process. Therefore, when we compare stamping small parts, the material should be first Arrange cutting with larger area, and then arrange cutting with smaller area to reduce the impact of impact load on stamping parts.
The second point is to compress the material. First of all, what we have to serve customers is the traditional mold design, which can balance the movement of the stripper plate during the stamping process, so that the material can be pressed. In the key parts of the part forming, the stripper plate must be an insert structure.
The third point is that we can make the punch into a slope or a solitary line. This is also a limited way to reduce the stamping process and reduce the impact load, and reduce the impact load, so as to achieve the same effect of turning and torsion of stamping parts.
The above are professional stamping parts processing manufacturers in Hebei. Let me introduce to you how to avoid deformation of stamping parts during processing is an important method. I hope that through our introduction, it will be helpful to your processing.
